Part 11- rectangular Tool Holder

 UNIVERSAL TOOL AND CUTTER GRINDER

 (Message from the author: This is a continuous article intended to be updated by myself as new and better information is compiled. Any comments or additions for my article, please contact This email address is being protected from spambots. You need JavaScript enabled to view it.. If your information can be of help to these articles, I will include the information and your name. If you do not want your information or name included let me know. James Long)

 

 

Purpose:

 

  • The Rectangular 7/8” X 7/8” opening of the Tool holder will hold just about anything you can put into it. (Could easily be opened up to 1” X 1”, maybe more)
  • Length of the part to be ground is not limited because the opening goes the length of the tool.
  • The front stick-out and grinding area is limited to the swing of the Index Head.
  • Movements are limited to the Top Slide (in and out or X & Y) and the Swing of the Index Head.
  • Grind complex and repeatable angles on cutting tools. More on this topic is later articles.

 

         

        

 

  Special Tool Holders

 

 

Grind Precision radius's

 

 

 

Rectangular Tool Holder:

Let me begin with this tool will work with no modifications.

I think that checking and repairing the Dovetail (see Part 10) is important however,

it will work “as is”.

 

The changes I made over time are improvements I made to make the tool better

for my use and suggestions for my readers. Many experimental changes I made

are not included primarly because they did not work or did not help improve the tool.

 

 

 

Terminology of parts Disclaimer:

Several names of the parts have been taken from the Deckel Catalog; to insure you the reader, will always know what part I am referring to. I have applied the identification of parts from other machines, catalogs and some I created for a clear description of the parts function, (eg. Top Slide Tool Holder).